Goodro Kitchen and Bath Co.,Ltd
[[TD-Hot Products]]
Home > Exhibition > Content

How to install kitchen water faucet

Goodro Kitchen and Bath Co.,Ltd | Updated: Jun 15, 2017

How to replace the kitchen faucet?

1.At the bottom of the faucet generally has a corner valve to control the water source of the faucet, before the replacement of the angle valve to be closed. If no corner valve is installed below the faucet, the main water valve in the home will need to be closed. In general, the first step is to cut off the water.

2.Close the water source switch, to the inlet water pipe and the junction of the sink to find the faucetinterface, using a spanner to twist the inlet pipe, the water hose down. Find the inlet hose to connect the corner valve or wall inlet, and use the wrench to remove the other end of the inlet hose.


3.After the water pipe is removed, hold the old faucet, gently rotate around, turn the faucet loose and remove the whole.

4.And then the new faucet directly loaded on it.

5.The last open angle valve or water main switch to test the use of the situation.

Goodro Kitchen and Bath Co.,Ltd