Goodro Kitchen and Bath Co.,Ltd
[[TD-Hot Products]]
Home > Exhibition > Content

Bathroom vessel faucets

Goodro Kitchen and Bath Co.,Ltd | Updated: Jun 16, 2017

Bathroom faucet leaking how to do?

1.The first step is to shut down the water supply, if the part is aging, the faucet shaft gasket wear can be clip out of the axis gasket to replace the new can. Occasionally drops of water, the duration is not long, this is normal phenomenon, no maintenance.

2.Check whether it is because there is hard sundries card in the outlet, or other scale such as debris plugging filter net, will also be deposited after a long time to plug the water outlet, can be removed according to the instructions after removal of dirt.


3.Faucet knob valve is not tightened because of valve aging gap, need to replace the valve. If the faucet is loose, it is because the screw loosening, just open the faucet, the screws can be tightened, if the faucet is not knob valve type, you need to replace the entire valve or contact the installation of manufacturers.

4.The faucet issued a different sound because the water pressure is too high, there are hot and cold water pipes are fixed bad results, and sometimes even the water inlet has scale will emit strange sound. After lowering the water pressure, check the installation of the plumbing has not installed lax place, basically can solve the problem, if there is a problem is the water pipe into the obstruction, need to dredge the pipeline.

5.Many times we like to screw the faucet very tight, to prevent it leaking, in fact, the correct approach should be light on the light off, so as to effectively protect the faucet, prolong the service life. For scale, etc. should also be cleaned regularly, the faucet surface should pay more attention to cleanliness. In the daily life should try not to cause collision percussion.

Goodro Kitchen and Bath Co.,Ltd