Goodro Kitchen and Bath Co.,Ltd
Tel:86-18106909390
E-mail:info@goodrofaucets.com
Products
[[TD-Hot Products]]
Exhibition
Home > Exhibition > Content

Single hole kitchen and bathroom faucet Installation

Goodro Kitchen and Bath Co.,Ltd | Updated: Mar 29, 2017


When purchasing single hole faucets, you should check the diameter of the water outlet. Most outlets in the market use pipes, which is why you have to consider the height of the water outlet. 35 cm distance from the sink is the most recommended height. Remember to use specific angle valve when installing and it should be fixed according to the hot and cold water outlet of the wall. If there is a distance between the angle valve and the faucet, you can use an extension pipe to connect them. Make sure not to use other pipe to connect them as strong water pressure could easily cause breakage and leakage to other pipes, which will cost you more. If the inlet pipe is longer than the outlet, cut the pipe and make sure that it is has appropriate length for when you bend it to reach where you want to place it. Caution: Do not bend to 90 degree angle or more. Do not forget to purchase a faucet circuit for water installation. Pipes should also be rinsed before installation.


Goodro Kitchen and Bath Co.,Ltd