Goodro Kitchen and Bath Co.,Ltd
Tel:86-18106909390
E-mail:info@goodrofaucets.com
Products
[[TD-Hot Products]]
Exhibition
Home > Exhibition > Content

Single handle kitchen faucet with spray repair

Goodro Kitchen and Bath Co.,Ltd | Updated: May 23, 2017

1,Spool is still closed after thefaucet is still water

This phenomenon may be caused by looseness of the valve cap loose and can not seal the water,the solution is to remove the handle and decorative cover,re-tighten the pressure cap,there may be a spool at the bottom of the apron deformation,Can not seal the water,the solution is to remove the spool,check the bottom of the apron,reset it and then re-install.

p201703080946072387244.jpg

2,Water from the spool around the exudation

This phenomenon may be loose or displacement spool,the solution is to remove the spool to re-install once

3,Water from the middle of the spool oozing

This phenomenon is the spool damage, the solution is to replace the spool.

4,Leading the bottom of the water leakage

This phenomenon is generally caused by the O-ring is not installed or deformation caused by the solution,the solution is to take out the hose,such as the O-ring is not deformed,the O-ring and the water pipe re-installed Yes,if you find that the O-ring has been deformed,replace the O-ring.


Goodro Kitchen and Bath Co.,Ltd