Goodro Kitchen and Bath Co.,Ltd
Tel:86-18106909390
E-mail:info@goodrofaucets.com
Products
[[TD-Hot Products]]
Exhibition
Home > Exhibition > Content

Hand basin mixer taps

Edit: Goodro Kitchen and Bath Co.,Ltd    Date: Jun 13, 2017

Wash basin Faucet Installation Steps

1.Take out the faucet, check all the accessories are complete, before installation must clear the installation hole around and water supply pipeline of dirt, to ensure that no impurities in the water inlet. In order to protect the faucet surface not to be scratched, it is recommended to wear gloves for installation.

2. Remove the rubber washer, the washer is used to relieve the pressure of contact between the faucet metal surface and the ceramic basin, protect the ceramic basin, then insert a water inlet and tighten.

p201612151329090595818.png

3.The threaded joint into the first water hose, and then the second water inlet hose through the threaded joint.

4.The second water hose into the inlet port, pay attention to the correct direction, force balance, and then tighten the threaded joints.

5. Put two water hoses into the white plastic pad. Set the locking nut to fix the faucet. Then tighten the sleeve. Lock two inlet pipe and angle valve respectively, do not use pliers to twist the plate to prevent deformation or even wring. Notice the connection of hot and cold water. Connect the outlet angle valve with the other end of the inlet pipe.


Goodro Kitchen and Bath Co.,Ltd